The current density in a circular wire is giv | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The total current $I$ flowing through the wire is given by the integral of current density $J$ over the cross-sectional area $A$: $I = \int J \, d

Vedclass · Accepted Answer

$37 \pi 	ext{ kJ}$

Vedclass · Answer

(B) The total current $I$ flowing through the wire is given by the integral of current density $J$ over the cross-sectional area $A$: $I = \int J \, dA$. Since the wire is circular,$dA = 2 \pi r \, dr$. $I = \int_0^{R} J(r) \cdot 2 \pi r \, dr$,where $R = 2 	imes 10^{-3} 	ext{ m}$. $I = \int_0^{2 	imes 10^{-3}} (10^5 r) \cdot (2 \pi r) \, dr = 2 \pi 	imes 10^5 \int_0^{2 	imes 10^{-3}} r^2 \, dr$. $I = 2 \pi 	imes 10^5 \left[ \frac{r^3}{3} ight]_0^{2 	imes 10^{-3}} = 2 \pi 	imes 10^5 	imes \frac{8 	imes 10^{-9}}{3} = \frac{16 \pi}{3} 	imes 10^{-4} 	ext{ A}$. The energy consumed $E$ is given by $E = V \cdot I \cdot t$. $E = 70 	ext{ V} 	imes \left( \frac{16 \pi}{3} 	imes 10^{-4} 	ext{ A} ight) 	imes 1000 	ext{ s}$. $E = 70 	imes \frac{16 \pi}{3} 	imes 10^{-1} = \frac{1120 \pi}{30} = \frac{112}{3} \pi \approx 37.33 \pi 	ext{ J}$. Given the options,the closest value is $37 \pi 	ext{ J}$ (Note: The unit in the provided options appears to be in Joules,not kJ).

The current density in a circular wire is given by $J(r) = (1 \times 10^5 \text{ A/m}^3) r$,where $r$ is the radial distance and the wire's radius is $2 \text{ mm}$. If the potential applied across the wire is $70 \text{ V}$,then the energy consumed by the wire in $1000 \text{ s}$ is:

Similar Questions

$A$ battery with $EMF$ $E$ and internal resistance $r$ is connected across a resistance $R$. The power consumption in $R$ will be maximum when:

What is the ratio of heat generated in resistors $R$ and $2R$ connected in parallel as shown in the figure?

$n$ identical bulbs,each designed to draw a power $P$ from a certain voltage supply,are joined in series across that supply. The total power which they will draw is

If the resistance of the filament increases with temperature,what will be the power dissipated in a $220\, V- 100\, W$ lamp when connected to a $110\, V$ power supply?

An electric bulb is designed to draw power $P_0$ at voltage $V_0$. If the voltage is $V$,it draws a power $P$. Then:

Vedclass Test Series

Exam Paper Generator

Online Exam Module