The dimensions of shear modulus are

$A$ uniform wire of length $L$ and radius $r$ is twisted by an angle $\alpha$. If the modulus of rigidity of the wire is $\eta$,then the elastic potential energy stored in the wire is .........

$A$ steel plate of face area $1 \, cm^2$ and thickness $4 \, cm$ is fixed rigidly at the lower surface. $A$ tangential force $F = 10 \, kN$ is applied on the upper surface as shown in the figure. The lateral displacement $x$ of the upper surface with respect to the lower surface is .............. $m$ (Modulus of rigidity for steel is $8 \times 10^{11} \, N/m^2$).

$A$ cylindrical rod of length $1 \ m$ and radius $4 \ cm$ is mounted vertically. It is subjected to a shear force of $10^5 \ N$ at the top. Considering infinitesimally small displacement in the upper edge,the angular displacement $\theta$ of the rod axis from its original position would be: (Shear modulus,$G = 10^{10} \ N/m^2$)

Given below are two statements: One is labelled as Assertion $(A)$ and the other is labelled as Reason $(R)$.
Assertion $(A)$: The stretching of a spring is determined by the shear modulus of the material of the spring.
Reason $(R)$: $A$ coil spring of copper has more tensile strength than a steel spring of same dimensions.
In the light of the above statements,choose the most appropriate answer from the options given below:

The edge of an aluminium cube is $10\; cm$ long. One face of the cube is firmly fixed to a vertical wall. $A$ mass of $100\; kg$ is then attached to the opposite face of the cube. The shear modulus of aluminium is $25\; GPa$. What is the vertical deflection of this face?