The extension of a wire by the application of load is $3 \ mm$. The extension in a wire of the same material and length but half the radius by the same load is..... $mm$.

An Indian rubber cord $L$ metre long and area of cross-section $A$ $m^2$ is suspended vertically. The density of rubber is $D$ $kg/m^3$ and Young's modulus of rubber is $E$ $N/m^2$. If the wire extends by $l$ metre under its own weight,then the extension $l$ is:

$A$ wire of area of cross-section $10^{-6} \ m^2$ is increased in length by $0.1 \%$. The tension produced is $1000 \ N$. The Young's modulus of the wire is:

In a tensile test on a metal bar of diameter $0.015 \ m$ and length $0.2 \ m$, the relation between the load and elongation within the proportional limit is found to be $F = 97.2 \times 10^6 (\Delta L)$, where $F$ is the load in $N$ and $\Delta L$ is the elongation in $m$. The Young's modulus of the material in $GPa$ is:

$A$ brass rod of length $2\,m$ and cross-sectional area $2.0\,cm^2$ is attached end to end to a steel rod of length $L$ and cross-sectional area $1.0\,cm^2$. The compound rod is subjected to equal and opposite pulls of magnitude $5 \times 10^4\,N$ at its ends. If the elongations of the two rods are equal,then the length of the steel rod $(L)$ is ........... $m$ $(Y_{Brass}=1.0\times 10^{11}\,N/m^2$ and $Y_{Steel} = 2.0 \times 10^{11}\,N/m^2)$.

The area of cross-section of a steel wire $(Y = 2.0 \times 10^{11} \ N/m^2)$ is $0.1 \ cm^2$. The force required to double its length will be