The figure shows the volume $V$ versus temperature $T$ graphs for a certain mass of a perfect gas at two constant pressures of $P_1$ and $P_2$. What inference can you draw from the graphs?

An engineer is given a fixed volume $V_m$ of metal with which to construct a spherical pressure vessel. Assuming the vessel has thin walls and is pressurized to its bursting point,the amount of gas the vessel can contain,$n$ (in moles),depends only on $V_m$ $(m^3)$,the temperature $T$ $(K)$,the ideal gas constant $R$ $(J/(K \cdot mol))$,and the tensile strength of the metal $\sigma$ $(N/m^2)$. Which of the following gives $n$ in terms of these parameters?

On $0^{\circ}C$,the pressure measured by a barometer is $760 \, mm$. What will be the pressure at $100^{\circ}C$?

The gas in a vessel is subjected to a pressure of $20 \ atm$ at a temperature of $27^{\circ}C$. If one-half of the gas is released from the vessel and the temperature of the remaining gas is raised by $50^{\circ}C$,the final pressure of the gas in the vessel is ....... $atm$.

An ideal gas is heated from $27^{\circ}C$ to $627^{\circ}C$ at constant pressure. If initial volume of gas is $4 \text{ m}^3$, then the new volume of the gas will be (in $\text{ m}^3$)

Two vessels separately contain two ideal gases $A$ and $B$ at the same temperature. The pressure of gas $A$ is three times the pressure of gas $B$. Under these conditions, the density of gas $A$ is found to be two times the density of $B$. The ratio of molecular weights of gas $A$ and $B$ i.e. $\frac{M_A}{M_B}$ is