The length of a sonometer wire is $0.75\, m$ and density is $9 \times 10^3\, kg/m^3$. It can bear a stress of $8.1 \times 10^8\, N/m^2$ without exceeding the elastic limit. What is the fundamental frequency that can be produced in the wire in $Hz$?

The fundamental frequency of a sonometer wire is $50 \ Hz$ for a given length and tension. If the length is increased by $25 \%$ while keeping the tension constant,what is the percentage change in the frequency of the second harmonic?

Two uniform stretched strings $A$ and $B$,made of steel,are vibrating under the same tension. If the first overtone of $A$ is equal to the second overtone of $B$ and if the radius of $A$ is twice that of $B$,the ratio of the lengths of the strings is

$A$ thin wire of length $99 \ cm$ is fixed at both ends as shown in the figure. The wire is kept under a tension and is divided into three segments of lengths $l_1, l_2$ and $l_3$ as shown in the figure. When the wire is made to vibrate, the segments vibrate respectively with their fundamental frequencies in the ratio $1: 2: 3$. Then, the lengths $l_1, l_2$ and $l_3$ of the segments respectively are (in $cm$):

The frequency of transverse vibrations in a stretched string is $200 \ Hz$. If the tension is increased four times and the length is reduced to one-fourth the original value,the frequency of vibration will be .... $Hz$.

The tension in a piano wire is $10 \ N$. What should be the tension in the wire to produce a note of double the frequency (in $N$)?