The maximum value of the applied force F such | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) For the block to remain at rest, the horizontal component of the applied force must be equal to the limiting friction force.From the free body dia

Vedclass · Accepted Answer

$20$

Vedclass · Answer

(A) For the block to remain at rest, the horizontal component of the applied force must be equal to the limiting friction force.From the free body diagram, the normal reaction $R$ is given by $R = mg + F \sin 60^{\circ}$.Given $m = \sqrt{3} \,kg$, $g = 10 \,ms^{-2}$, and $\mu = \frac{1}{2\sqrt{3}}$.$R = \sqrt{3} 	imes 10 + F \sin 60^{\circ} = 10\sqrt{3} + F \frac{\sqrt{3}}{2}$.The limiting friction force is $f = \mu R = \frac{1}{2\sqrt{3}} \left( 10\sqrt{3} + F \frac{\sqrt{3}}{2} ight) = \frac{10}{2} + \frac{F}{4} = 5 + \frac{F}{4}$.The horizontal component of the applied force is $F \cos 60^{\circ} = F 	imes \frac{1}{2} = \frac{F}{2}$.Equating the horizontal force to the limiting friction for the maximum value of $F$:$\frac{F}{2} = 5 + \frac{F}{4}$$\frac{F}{2} - \frac{F}{4} = 5$$\frac{F}{4} = 5$$F = 20 \,N$.

The maximum value of the applied force $F$ such that the block as shown in the arrangement does not move is (Acceleration due to gravity, $g=10 \,ms^{-2}$) (in $\,N$)

Similar Questions

$A$ man walks over a rough surface; the angle between the force of friction and the instantaneous velocity of the person is

$A$ wooden block of mass $M$ lies on a rough floor. Another wooden block of the same mass is hanging from the point $O$ through strings as shown in the figure. To achieve equilibrium,the coefficient of static friction between the block on the floor and the floor itself is:

$A$ body of mass $10 \ kg$ slides along a rough horizontal surface. The coefficient of friction is $1/\sqrt{3}$. Taking $g = 10 \ m/s^2$,the least force which acts at an angle of $30^\circ$ to the horizontal is ...... $N$.

$A$ $20\, kg$ block is initially at rest on a rough horizontal surface. $A$ horizontal force of $75\, N$ is required to set the block in motion. After it is in motion,a horizontal force of $60\, N$ is required to keep the block moving with constant speed. The coefficient of static friction is

$A$ block of mass $m$ rests on a horizontal table with a coefficient of static friction $\mu$. What minimum force must be applied on the block to drag it on the table?

Vedclass Test Series

Exam Paper Generator

Online Exam Module