The phosphor bronze strip is used in a moving coil galvanometer because

$A$ student is provided with a variable voltage source $V$,a test resistor $R_T=10\,\Omega$,two identical galvanometers $G_1$ and $G_2$,and two additional resistors,$R_1=10\,M\,\Omega$ and $R_2=0.001\,\Omega$. For conducting an experiment to verify Ohm's law,the most suitable circuit is:

In a galvanometer,$5 \%$ of the total current in the circuit passes through it. If the resistance of the galvanometer is $G$,the shunt resistance $S$ connected to the galvanometer is

$A$ galvanometer of resistance $50 \ \Omega$ is connected to a battery of $8 \ V$ along with a resistance of $3950 \ \Omega$ in series. $A$ full-scale deflection of $30$ divisions is obtained in the galvanometer. In order to reduce this deflection to $15$ divisions,the resistance in series should be . . . . . . $\Omega$.

$A$ galvanometer has a resistance $100 \ \Omega$ and its full-scale deflection current is $10 \ mA$. What is the value of the shunt resistance required so that it can measure current up to $10 \ A$?

Give the unit of shunt.