The ratio of the radius of gyration of a thin | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The radius of gyration $k$ is given by the formula $k = \sqrt{\frac{I}{m}}$,where $I$ is the moment of inertia and $m$ is the mass.For a thin unif

Vedclass · Accepted Answer

$\sqrt{2}: 1$

Vedclass · Answer

(A) The radius of gyration $k$ is given by the formula $k = \sqrt{\frac{I}{m}}$,where $I$ is the moment of inertia and $m$ is the mass.For a thin uniform disc of mass $m$ and radius $R$:$1$. The moment of inertia about an axis passing through its centre and normal to its plane is $I_1 = \frac{mR^2}{2}$.$2$. The moment of inertia about its diameter is $I_2 = \frac{mR^2}{4}$.Let $k_1$ and $k_2$ be the radii of gyration corresponding to $I_1$ and $I_2$ respectively.Then,$\frac{k_1}{k_2} = \sqrt{\frac{I_1}{I_2}} = \sqrt{\frac{mR^2 / 2}{mR^2 / 4}} = \sqrt{\frac{4}{2}} = \sqrt{2} = \sqrt{2}: 1$.

The ratio of the radius of gyration of a thin uniform disc about an axis passing through its centre and normal to its plane to the radius of gyration of the disc about its diameter is

Similar Questions

$A$ circular disc is to be made by using iron and aluminium,so that it acquires maximum moment of inertia about its geometrical axis. This is possible with:

Two masses $m_1$ and $m_2$ are placed at a distance $r$ from each other. Find the moment of inertia of the system about an axis passing through the center of mass and perpendicular to the line joining the masses.

$A$ circular disc is made using iron and aluminum. To maximize the moment of inertia about its geometric axis,which configuration is preferred?

The moment of inertia of a straight thin rod of mass $M$ and length $l$ about an axis perpendicular to its length and passing through its one end,is

Vedclass Test Series

Exam Paper Generator

Online Exam Module