The surface tension of most of the liquids decreases with a rise in:

When water is filled carefully in a glass,one can fill it to a height $h$ above the rim of the glass due to the surface tension of water. To calculate $h$ just before water starts flowing,model the shape of the water above the rim as a disc of thickness $h$ having semicircular edges,as shown schematically in the figure. When the pressure of water at the bottom of this disc exceeds what can be withstood due to the surface tension,the water surface breaks near the rim and water starts flowing from there. If the density of water,its surface tension and the acceleration due to gravity are $10^3 \ kg \ m^{-3}$,$0.07 \ N \ m^{-1}$ and $10 \ m \ s^{-2}$,respectively,the value of $h$ (in $mm$) is:

What is the ratio of the surface tension force acting on the curved part to that on the flat part?

$A$ square frame of each side $L$ is dipped in a soap solution and taken out. The force acting on the film formed is ($T$ = surface tension of soap solution). (in $TL$)

$A$ wire of length $20 \ cm$ is placed horizontally on the surface of water and is gently pulled up with a force of $1.456 \times 10^{-2} \ N$ to keep the wire in equilibrium. The surface tension of water is (in $N \ m^{-1}$)

$Assertion :$ $A$ large force is required to draw apart two glass plates enclosing a thin water film.
$Reason :$ Water acts as a glue and sticks the two glass plates together.