The velocity of the upper layer of water in a | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) According to Newton's law of viscosity,the shearing stress $	au$ is given by $	au = \eta \frac{dv}{dy}$.Here,$	au = 10^{-3} \, N/m^2$,$\eta = 1

Vedclass · Accepted Answer

$100$

Vedclass · Answer

(D) According to Newton's law of viscosity,the shearing stress $	au$ is given by $	au = \eta \frac{dv}{dy}$.Here,$	au = 10^{-3} \, N/m^2$,$\eta = 10^{-2} \, Pa \cdot s$,and the velocity gradient $\frac{dv}{dy} = \frac{v}{h}$,where $v$ is the velocity of the upper layer and $h$ is the depth of the river.First,convert the velocity $v$ into $SI$ units: $v = 36 \, km/h = 36 	imes \frac{5}{18} \, m/s = 10 \, m/s$.Substituting the values into the formula: $10^{-3} = 10^{-2} 	imes \frac{10}{h}$.Rearranging for $h$: $h = \frac{10^{-2} 	imes 10}{10^{-3}} = \frac{10^{-1}}{10^{-3}} = 10^2 = 100 \, m$.Thus,the depth of the river is $100 \, m$.

The velocity of the upper layer of water in a river is $36 \, km/h$. The shearing stress between horizontal layers of water is $10^{-3} \, N/m^2$. The depth of the river is $h$. (The coefficient of viscosity of water is $10^{-2} \, Pa \cdot s$). Find the value of $h$ in meters.

Similar Questions

The relative velocity of two consecutive layers is $8 \ cm/s$. If the perpendicular distance between the layers is $0.1 \ cm$,then the velocity gradient will be ......... $s^{-1}$.

The speed of the water in a river is $V$ near the surface. If the coefficient of viscosity of water is $\eta$ and the depth of the river is $H$, then the shearing stress between the horizontal layers of water is

Water is flowing steadily in a river. $A$ and $B$ are two layers of water at heights $40 \ cm$ and $90 \ cm$ from the bottom. The velocity of layer $A$ is $12 \ cm/s$. If the velocity of the water at the bottom is $0$,what is the velocity of layer $B$ (in $cm/s$)?

There is a $1\, mm$ thick layer of glycerine between a flat plate of area $100\, cm^2$ and a big plate. If the coefficient of viscosity of glycerine is $1.0\, kg/(m\cdot s)$,then the force required to move the plate with a velocity of $7\, cm/s$ is $.......\, N$.

$A$ thin plate is placed between two fixed plates,separating two liquids with coefficients of viscosity $\eta$ and $4\eta$,as shown in the figure. If the plate is to be pulled by applying the minimum force,then the ratio $\frac{d_2}{d_1}$ is:

Vedclass Test Series

Exam Paper Generator

Online Exam Module