The Young's modulus of a wire of length $L$ and radius $r$ is $Y$. If the length is reduced to $\frac{L}{2}$ and radius is $\frac{r}{2}$,then the Young's modulus will be

In an experiment to determine the Young's modulus,steel wires of five different lengths $(1, 2, 3, 4$ and $5\,m)$ but of same cross-section $(2\,mm^2)$ were taken and curves between extension and load were obtained. The slope $(\text{extension/load})$ of the curves were plotted with the wire length and the following graph is obtained. If the Young's modulus of given steel wires is $x \times 10^{11}\,N/m^2$,then the value of $x$ is

Two metallic wires $P$ and $Q$ have the same volume and are made up of the same material. If their areas of cross-section are in the ratio $4:1$ and a force $F_1$ is applied to $P$,an extension of $\Delta l$ is produced. The force required to produce the same extension in $Q$ is $F_2$. The value of $\frac{F_1}{F_2}$ is . . . . . . .

$A$ wire of length $L$ and radius $r$ is rigidly fixed at one end. On stretching the other end of the wire with a force $F$,the increase in length is $l$. If another wire of the same material but double the length and double the radius is stretched with a force $2F$,then the increase in length is:

If $\rho$ is the density of the material of a wire and $\sigma$ is the breaking stress, what is the greatest length of the wire that can hang freely without breaking?

The mass and length of a wire are $M$ and $L$ respectively. The density of the material of the wire is $d$. On applying a force $F$ on the wire,the increase in length is $l$. Then,the Young's modulus of the material of the wire will be: