The Young's modulus of a wire of length $L$ and radius $r$ is $Y \ N/m^2$. If the length and radius are reduced to $L/2$ and $r/2,$ then its Young's modulus will be

$A$ brass wire $1.8\; m$ long at $27\;^{\circ}C$ is held taut with little tension between two rigid supports. If the wire is cooled to a temperature of $-39\;^{\circ}C$,what is the tension developed in the wire,if its diameter is $2.0\; mm$? (Coefficient of linear expansion of brass $\alpha = 2.0 \times 10^{-5}\; K^{-1}$; Young's modulus of brass $Y = 0.91 \times 10^{11}\; Pa$)

$A$ constant force is applied to a metal wire of length $L$. The volume of the wire remains constant. The extension produced is proportional to:

$A$ $14.5\; kg$ mass,fastened to the end of a steel wire of unstretched length $1.0\; m$,is whirled in a vertical circle with an angular velocity of $2\; rev/s$ at the bottom of the circle. The cross-sectional area of the wire is $0.065\; cm^2$. Calculate the elongation of the wire when the mass is at the lowest point of its path.

Steel and copper wires of the same length are stretched by the same weight one after the other. The Young's modulus of steel and copper are $2 \times 10^{11} \, N/m^2$ and $1.2 \times 10^{11} \, N/m^2$,respectively. What is the ratio of the increase in their lengths?

The dimensions of four wires of the same material are given below. In which wire will the increase in length be maximum when the same tension is applied?