There are three voltmeters of the same range but of resistances $10000\,\Omega$,$8000\,\Omega$,and $4000\,\Omega$ respectively. The best voltmeter among these is the one whose resistance is ................ $\Omega$.

Current sensitivities of two galvanometers $G_1$ and $G_2$ of resistances $100 \ \Omega$ and $50 \ \Omega$ are $10^8 \ \text{div/A}$ and $0.5 \times 10^5 \ \text{div/A}$ respectively. The galvanometer in which the voltage sensitivity is more is

$A$ voltmeter of resistance $1000\,\Omega$ gives full scale deflection when a current of $100\,mA$ flows through it. The shunt resistance required across it to enable it to be used as an ammeter reading $1\,A$ at full scale deflection is ............... $\Omega$.

Only $4 \%$ of the total current in the circuit passes through a galvanometer. If the resistance of the galvanometer is $G$,then the shunt resistance connected to the galvanometer is:

The scale of a galvanometer is divided into $160$ equal divisions. The galvanometer shows full scale deflection of $16$ mA and maximum voltage is $80$ mV. Now the range is changed so that the galvanometer reads $160$ $V$. The required resistance to be connected is

The scale of a galvanometer is divided into $25$ equal divisions. The resistance of the galvanometer is $100 \,\Omega$. The current sensitivity of the galvanometer is $4 \times 10^{-4} \,A/div$. What resistance in $ohm$ must be connected in series to measure $2.5 \,V$?