Three bulbs of 40,W,60,W,and 100,W are connec | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The power rating of a bulb is given by the formula $P = \frac{V^2}{R}$,where $V$ is the rated voltage and $R$ is the resistance of the bulb.From t

Vedclass · Accepted Answer

$100\,W$

Vedclass · Answer

(C) The power rating of a bulb is given by the formula $P = \frac{V^2}{R}$,where $V$ is the rated voltage and $R$ is the resistance of the bulb.From this relation,we can see that $R = \frac{V^2}{P}$.Since the rated voltage $V$ is the same for all bulbs,the resistance $R$ is inversely proportional to the power $P$ $(R \propto \frac{1}{P})$.Therefore,the bulb with the highest power rating will have the minimum resistance.Comparing the given power ratings ($40\,W$,$60\,W$,and $100\,W$),the $100\,W$ bulb has the highest power.Thus,the $100\,W$ bulb has the minimum resistance.

Three bulbs of $40\,W$,$60\,W$,and $100\,W$ are connected in series with a $220\,V$ supply. Which bulb has the minimum resistance?

Similar Questions

$A$ wire of resistance $R$ is stretched until its radius is halved. What will be the new resistance (in $, R$)?

The graph showing the variation of resistance $(R)$ of a metal wire as a function of its diameter $(D)$,while keeping other parameters like length and temperature constant,is:

By increasing the temperature,the specific resistance (resistivity) of a conductor and a semiconductor,respectively,is:

The resistivity of a wire depends on its

$A$ piece of copper is to be shaped into a conducting wire of maximum resistance. If the initial length is $L$ and diameter is $d$,what should be the new length and diameter to achieve maximum resistance?

Vedclass Test Series

Exam Paper Generator

Online Exam Module