Three rods $AB$, $BC$, and $BD$ made of the same material and having the same cross-section have been joined as shown in the figure. The ends $A$, $C$, and $D$ are held at temperatures of $20^{\circ} C$, $80^{\circ} C$, and $80^{\circ} C$ respectively. If each rod is of the same length, then the temperature at the junction $B$ of the three rods is: (in $^{\circ} C$)

Two rods of same length and material transfer a given amount of heat in $12 \, s$ when they are joined end to end. But when they are joined lengthwise (parallel),they will transfer the same amount of heat under the same conditions in .......... $s$.

The dimensions of thermal resistance are

In a composite slab, there are two materials having coefficients of thermal conductivity $K$ and $2K$, and thicknesses $x$ and $4x$ respectively. The temperatures of the two outer surfaces of the composite slab are $T_2$ and $T_1$ $(T_2 > T_1)$. $T_2$ is on the side with conductivity $K$ and $T_1$ is on the side with conductivity $2K$. The rate of heat transfer through the slab in a steady state is $\left[ \frac{A(T_2 - T_1)K}{x} \right] \cdot f$, where $f$ is equal to:

Two rods of same length and material transfer a given amount of heat in $12 \ s$,when they are joined end to end. But when they are joined along their lengths (parallel combination),then they will transfer the same amount of heat under the same conditions in time $t = \dots \ s$.

$A$ slab consists of two parallel layers of copper and brass of equal thickness. The ratio of their thermal conductivities is $1:4$. If the temperature of the free side of the brass is $100^{\circ}C$ and that of the copper is $0^{\circ}C$,find the temperature of the interface in $^{\circ}C$.