To paint the side of a building,a painter nor | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) Let $T$ be the tension in rope $A$. The painter pulls rope $A$ downwards with force $T$,and the rope pulls the painter upwards with force $T$. The

Vedclass · Accepted Answer

Both $(A)$ and $(C)$.

Vedclass · Answer

(D) Let $T$ be the tension in rope $A$. The painter pulls rope $A$ downwards with force $T$,and the rope pulls the painter upwards with force $T$. The platform is also supported by the other end of rope $A$,which exerts an upward force $T$ on the platform. Thus,the total upward force on the system (painter + platform) is $2T$.The rope $B$ supports the pulley,so the tension in rope $B$ is $T_B = 2T$. Given that the maximum tension rope $B$ can withstand is $300 \, N$,we have $2T_{\max} = 300 \, N$,which implies $T_{\max} = 150 \, N$.$(i)$ For maximum upward acceleration $a_{\max}$:Using Newton's Second Law for the system: $2T_{\max} - mg = m a_{\max}$.Given $mg = 200 \, N$,so $m = \frac{200}{g} \approx 20 \, kg$ (taking $g = 10 \, m/s^2$).$300 - 200 = 20 a_{\max} \implies 100 = 20 a_{\max} \implies a_{\max} = 5 \, m/s^2$. Thus,$(A)$ is correct.$(ii)$ When the painter is at rest,the system is in equilibrium:$2T = mg = 200 \, N \implies T = 100 \, N$. Thus,$(C)$ is correct.Since both $(A)$ and $(C)$ are correct,the correct option is $(D)$.

To paint the side of a building,a painter normally hoists himself up by pulling on the rope $A$ as shown in the figure. The painter and platform together weigh $200 \, N$. The rope $B$ can withstand a maximum tension of $300 \, N$. Then:

Similar Questions

$A$ pulley fixed to the ceiling carries a string with blocks of mass $m$ and $3m$ attached to its ends. The masses of the string and pulley are negligible. When the system is released,what is the acceleration of its center of mass?

For the pulley system shown in the figure,calculate the kinetic energy of the $6\,kg$ block after $5\,s$. (Assume $g = 10\,m/s^2$)

Two weights of mass $m_{1}$ and $m_{2} (> m_{1})$ are joined by an inextensible string of negligible mass passing over a fixed frictionless pulley. The magnitude of the acceleration of the loads is

Three masses $m_1 = 4 \text{ kg}$, $m_2 = 4 \text{ kg}$, and $m_3 = 6 \text{ kg}$ are suspended from a fixed smooth frictionless pulley as shown in the figure. The value of $T_1/T_2$ is . . . . . . . (Take $g = 10 \text{ m/s}^2$)

Two bodies of mass $6 \ kg$ and $4 \ kg$ are tied to a string as shown in the adjoining figure. If the table and pulley are frictionless,then the acceleration of the $6 \ kg$ mass will be $........ \ ms^{-2}$ $\left(g=10 \ ms^{-2}\right)$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module