Two blocks of ice when pressed together join to form one block because

$A$ cylindrical vessel containing a liquid is rotated about its axis so that the liquid rises at its sides as shown in the figure. The diameter of the vessel is $10 \, cm$ and the angular speed of rotation is $\omega \, rad \, s^{-1}$. The difference in the height,$h$ (in $cm$),of the liquid at the centre of the vessel and at the side will be

Water coming out of a horizontal tube at a speed $v$ strikes a vertical wall normally,close to the mouth of the tube,and falls down vertically after impact. When the speed of water is increased to $2v$:

$A$ spray gun is shown in the figure where a piston pushes air out of a nozzle. $A$ thin tube of uniform cross section is connected to the nozzle. The other end of the tube is in a small liquid container. As the piston pushes air through the nozzle,the liquid from the container rises into the nozzle and is sprayed out. For the spray gun shown,the radii of the piston and the nozzle are $20 \ mm$ and $1 \ mm$ respectively. The upper end of the container is open to the atmosphere.
$1.$ If the piston is pushed at a speed of $5 \ mm \ s^{-1}$,the air comes out of the nozzle with a speed of
$(A)$ $0.1 \ m \ s^{-1}$ $(B)$ $1 \ m \ s^{-1}$ $(C)$ $2 \ m \ s^{-1}$ $(D)$ $8 \ m \ s^{-1}$
$2.$ If the density of air is $\rho_{a}$ and that of the liquid is $\rho_{\ell}$,then for a given piston speed,the rate (volume per unit time) at which the liquid is sprayed will be proportional to
$(A)$ $\sqrt{\frac{\rho_{a}}{\rho_{\ell}}}$ $(B)$ $\sqrt{\rho_{a} \rho_{\ell}}$ $(C)$ $\sqrt{\frac{\rho_{\ell}}{\rho_{a}}}$ $(D)$ $\rho_{\ell}$

$A$ slender homogeneous rod of length $2L$ floats partly immersed in water,being supported by a string fastened to one of its ends,as shown. The specific gravity of the rod is $0.75$. The length of the rod that extends out of water is:

$A$ razor-blade floats on the surface of water contained in a glass. When the glass is gently shaken,the razor-blade sinks. Mark the incorrect statement.