Two blocks of masses 1 , kg and 2 , kg are co | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The stress in the wire is given by $	ext{Stress} = \frac{	ext{Tension}}{	ext{Area of cross-section}}$.To avoid breaking, the stress must not ex

Vedclass · Accepted Answer

$4.6 	imes 10^{-5} \, m$

Vedclass · Answer

(A) The stress in the wire is given by $	ext{Stress} = \frac{	ext{Tension}}{	ext{Area of cross-section}}$.To avoid breaking, the stress must not exceed the breaking stress.Let the tension in the wire be $T$ and the acceleration of the system be $a$.The equations of motion for the two blocks are:For the $1 \, kg$ block: $T - 1(10) = 1a \implies T - 10 = a$ (Equation $1$)For the $2 \, kg$ block: $2(10) - T = 2a \implies 20 - T = 2a$ (Equation $2$)Adding Equation $1$ and Equation $2$:$(T - 10) + (20 - T) = a + 2a$$10 = 3a \implies a = \frac{10}{3} \, m/s^2$Substituting $a$ into Equation $1$:$T = 10 + \frac{10}{3} = \frac{40}{3} \, N$The breaking stress is $\sigma_{max} = 2 	imes 10^9 \, N/m^2$. The area of cross-section is $A = \pi r^2$.Setting the stress equal to the breaking stress to find the minimum radius $r$:$\frac{T}{A} = \sigma_{max} \implies \frac{40/3}{\pi r^2} = 2 	imes 10^9$$r^2 = \frac{40}{3 	imes \pi 	imes 2 	imes 10^9} = \frac{20}{3 \pi 	imes 10^9} \approx \frac{20}{9.4247 	imes 10^9} \approx 2.122 	imes 10^{-9} \, m^2$$r = \sqrt{2.122 	imes 10^{-9}} \approx 4.6 	imes 10^{-5} \, m$.

Two blocks of masses $1 \, kg$ and $2 \, kg$ are connected by a metal wire going over a smooth pulley as shown in the figure. The breaking stress of the metal is $2 \times 10^9 \, N/m^2$. What should be the minimum radius of the wire used if it is not to break? Take $g = 10 \, m/s^2$.

Similar Questions

If the breaking force for a given wire is $F$, then the breaking force of two wires of the same material and same dimensions joined together in parallel will be

In a series combination of copper and steel wires of same length and same diameter,a force is applied at one of their ends while the other end is kept fixed. The combined length is increased by $2 \ cm$. The wires will have ..........

Due to the addition of impurities,the modulus of elasticity

$A$ spring is stretched by applying a load to its free end. The strain produced in the spring is

Vedclass Test Series

Exam Paper Generator

Online Exam Module