Two rods $A$ and $B$ of the same cross-sectional area $A$ and length $l$ are connected in series between a source $(T_1 = 100^{\circ}C)$ and a sink $(T_2 = 0^{\circ}C)$ as shown in the figure. The rods are laterally insulated. The thermal conductivities of rods $A$ and $B$ are $3K$ and $K$ respectively. The ratio of the thermal resistance of rod $A$ to that of rod $B$ is:

An iron bar $(L_{1}=0.1 \; m, A_{1}=0.02 \; m^{2}, K_{1}=79 \; W m^{-1} K^{-1})$ and a brass bar $(L_{2}=0.1 \; m, A_{2}=0.02 \; m^{2}, K_{2}=109 \; W m^{-1} K^{-1})$ are soldered end to end as shown in the figure. The free ends of the iron bar and brass bar are maintained at $373 \; K$ and $273 \; K$ respectively. Obtain expressions for and hence compute:
$(i)$ the temperature of the junction of the two bars,
$(ii)$ the equivalent thermal conductivity of the compound bar,and
$(iii)$ the heat current through the compound bar.

Three rods of identical dimensions are connected as shown in the figure. Points $P$ and $Q$ are maintained at different temperatures. If the rate of heat flow through $PRQ$ and $PQ$ is the same,then...

Two metal slabs of same cross-sectional area have thicknesses $d_1$ and $d_2$,and thermal conductivities $K_1$ and $K_2$ respectively,are connected in series. The free ends of the two slabs are kept at temperatures $T_1$ and $T_2$ $(T_1 > T_2)$. The temperature $T$ of their common junction is

In a composite slab, there are two materials having coefficients of thermal conductivity $K$ and $2K$, and thicknesses $x$ and $4x$ respectively. The temperatures of the two outer surfaces of the composite slab are $T_2$ and $T_1$ $(T_2 > T_1)$. $T_2$ is on the side with conductivity $K$ and $T_1$ is on the side with conductivity $2K$. The rate of heat transfer through the slab in a steady state is $\left[ \frac{A(T_2 - T_1)K}{x} \right] \cdot f$, where $f$ is equal to:

Three identical rods $A, B$ and $C$ are placed end to end. $A$ temperature difference is maintained between the free ends of $A$ and $C$. The thermal conductivity of $B$ is thrice that of $C$ and half of that of $A$. The effective thermal conductivity of the system will be ($K_{A}$ is the thermal conductivity of rod $A$).