Two rods of equal length and diameter have thermal conductivities $3$ and $4$ units respectively. If they are joined in series, the thermal conductivity of the combination would be

$A$ rod $CD$ of thermal resistance $10.0 \; K/W$ is joined at the middle of an identical rod $AB$ as shown in the figure. The ends $A$,$B$,and $D$ are maintained at $200^{\circ}C$,$100^{\circ}C$,and $125^{\circ}C$ respectively. The heat current in $CD$ is $P$ watt. The value of $P$ is ... .

Two rods $A$ and $B$ of different materials are welded together as shown in the figure. Their thermal conductivities are $K_1$ and $K_2$. The thermal conductivity of the composite rod will be:

Two metal slabs of same cross-sectional area have thicknesses $d_1$ and $d_2$,and thermal conductivities $K_1$ and $K_2$ respectively,are connected in series. The free ends of the two slabs are kept at temperatures $T_1$ and $T_2$ $(T_1 > T_2)$. The temperature $T$ of their common junction is

$ABCDE$ is a regular pentagon made of uniform wire. Heat enters at $A$ and leaves at $C$. $T_B$ and $T_D$ are the temperatures of points $B$ and $D$ respectively. Find the temperature $T_C$.

Five wires each of cross-sectional area $A$ and length $l$ are combined as shown. The thermal conductivity of copper and steel are $k_1$ and $k_2$ respectively. The equivalent thermal resistance between $A$ and $C$ is