When 80 V d.c. is applied across a solenoid, | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) When $80 \ V$ $d.c.$ is applied,the solenoid acts as a pure resistor because the frequency of $d.c.$ is zero,so inductive reactance $X_L = 2 \pi f

Vedclass · Accepted Answer

$200 \ \Omega, 0.55 \ H$

Vedclass · Answer

(A) When $80 \ V$ $d.c.$ is applied,the solenoid acts as a pure resistor because the frequency of $d.c.$ is zero,so inductive reactance $X_L = 2 \pi fL = 0$.Resistance $R = \frac{V}{I_{dc}} = \frac{80 \ V}{0.8 \ A} = 100 \ \Omega$.When $80 \ V$ $a.c.$ is applied,the impedance $Z$ is given by $Z = \frac{V}{I_{ac}} = \frac{80 \ V}{0.4 \ A} = 200 \ \Omega$.The impedance of an $RL$ circuit is $Z = \sqrt{R^2 + X_L^2}$.Substituting the values: $200 = \sqrt{100^2 + X_L^2}$.$40000 = 10000 + X_L^2 \Rightarrow X_L^2 = 30000$.$X_L = \sqrt{30000} \approx 173.2 \ \Omega$.Since $X_L = 2 \pi fL$,we have $L = \frac{X_L}{2 \pi f} = \frac{173.2}{2 	imes 3.14 	imes 50} = \frac{173.2}{314} \approx 0.55 \ H$.Thus,the impedance is $200 \ \Omega$ and the inductance is $0.55 \ H$.

When $80 \ V$ $d.c.$ is applied across a solenoid,a current of $0.8 \ A$ flows in it. When $80 \ V$ $a.c.$ is applied across the same solenoid,the current becomes $0.4 \ A$. If the frequency of $a.c.$ source is $50 \ Hz$,the impedance and inductance of the solenoid are nearly:

Similar Questions

In an $LCR$ series circuit,if $V$ is the effective value of the applied voltage,$V_R$ is the voltage across $R$,and $V_L$ and $V_C$ are the effective voltages across $L$ and $C$ respectively,then:

An e.m.f. $E=E_0 \cos \omega t$ is applied to a circuit containing $L$ and $R$ in series. If $X_L=2 R$,then the power dissipated in the circuit is

$A$ resistance of $200 \ \Omega$ and an inductor of $\frac{1}{2 \pi} \ H$ are connected in series to an a.c. voltage of $40 \ V$ and $100 \ Hz$ frequency. The phase angle between the voltage and current is

In the $A$.$C$. circuit shown,keeping switch $K$ closed,if an iron rod is inserted into the coil,the bulb in the circuit:

In a $L-R$ circuit of $4 \text{ mH}$ inductance and $3 \text{ } \Omega$ resistance, e.m.f. $E = \cos(1000t) \text{ V}$ is applied. The amplitude of current is (in $\text{ A}$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module