When a galvanometer is shunted by a resistance $s$,its current capacity increases $n$ times. If the same galvanometer is shunted by another resistance $s_1$,its capacity will increase to $n_1$ times the original current. The value of $n_1$ is

$A$ moving coil galvanometer of resistance $100 \ \Omega$ shows full-scale deflection when a current of $100 \ \mu A$ passes through it. If it is intended to show full-scale deflection when a current of $1 \ mA$ passes through it,the value of shunt resistance in ohms to be connected to the galvanometer is:

$A$ galvanometer has a coil of resistance $200 \Omega$ with a full scale deflection at $20 \mu A$. The value of resistance to be added to use it as an ammeter of range $(0-20) mA$ is: (in $\Omega$)

If a galvanometer is shunted by $(\frac{1}{n-1})^{th}$ of the value of its resistance, then the fraction of the total current passing through the galvanometer is

When a resistance of $200 \Omega$ is connected in series with a galvanometer of resistance $G$,its range is $V$. To triple its range,a resistance of $2000 \Omega$ is connected in series. The value of $G$ is (in $\Omega$)

$A$ $50\,\Omega$ resistance is connected to a battery of $5\,V$. $A$ galvanometer of resistance $100\,\Omega$ is to be used as an ammeter to measure current through the resistance. For this,a resistance $r_s$ is connected to the galvanometer. Which of the following connections should be employed if the measured current is within $1\%$ of the current without the ammeter in the circuit?