Which devices are used for the measurement of lengths of different orders?

In a screw gauge, the zero of the circular scale lies $3$ divisions above the horizontal pitch line when their metallic studs are brought in contact. Using this instrument, the thickness of a sheet is measured. If the pitch scale reading is $1 \ mm$ and the circular scale reading is $51$, then the correct thickness of the sheet is . . . . . . $mm$. [Assume least count is $0.01 \ mm$]

$A$ student measured the diameter of a wire using a screw gauge with the least count $0.001\, cm$ and listed the measurements. The measured value should be recorded as (in $, cm$)

Using a screw gauge with a pitch of $0.1 \ cm$ and $50$ divisions on its circular scale,the thickness of an object is measured. How should the measurement be correctly recorded (in $cm$)?

The pitch and the number of divisions on the circular scale for a given screw gauge are $0.5\,mm$ and $100$ respectively. When the screw gauge is fully tightened without any object,the zero of its circular scale lies $3$ divisions below the mean line. The readings of the main scale and the circular scale for a thin sheet are $5.5\,mm$ and $48$ respectively. The thickness of this sheet is: (in $,mm$)

If the screw on a screw gauge is given six rotations,it moves by $3\; mm$ on the main scale. If there are $50$ divisions on the circular scale,the least count of the screw gauge is: