While measuring the diameter of a wire using a screw gauge, the following readings were noted. The main scale reading is $1 \,mm$ and the circular scale reading is equal to $42$ divisions. The pitch of the screw gauge is $1 \,mm$ and it has $100$ divisions on the circular scale. The diameter of the wire is $\frac{x}{50} \,mm$. The value of $x$ is:

There are $100$ divisions on the circular scale of a screw gauge of pitch $1 \,mm$. With no measuring quantity in between the jaws,the zero of the circular scale lies $5$ divisions below the reference line. The diameter of a wire is then measured using this screw gauge. It is found that $4$ linear scale divisions are clearly visible while $60$ divisions on the circular scale coincide with the reference line. The diameter of the wire is: (in $\,mm$)

The diameter of a sphere is measured using a vernier caliper whose $9$ divisions of the main scale are equal to $10$ divisions of the vernier scale. The shortest division on the main scale is equal to $1 \,mm$. The main scale reading is $2 \,cm$ and the second division of the vernier scale coincides with a division on the main scale. If the mass of the sphere is $8.635 \,g$, the density of the sphere is:

$A$ student measured the diameter of a wire using a screw gauge with the least count $0.001\, cm$ and listed the measurements. The measured value should be recorded as (in $, cm$)

The smallest division on the main scale of a vernier callipers is $1 \ mm$,and $10$ vernier divisions coincide with $9$ main scale divisions. While measuring the diameter of a sphere,the zero mark of the vernier scale lies between $2.0 \ cm$ and $2.1 \ cm$ of the main scale,and the fifth division of the vernier scale coincides with a main scale division. The diameter of the sphere is:

In a vernier calliper,when both jaws touch each other,the zero of the vernier scale shifts towards the left and its $4^{\text{th}}$ division coincides exactly with a certain division on the main scale. If $50$ vernier scale divisions $(VSD)$ are equal to $49$ main scale divisions $(MSD)$ and the zero error in the instrument is $0.04 \text{ mm}$,then how many main scale divisions are there in $1 \text{ cm}$?