$A$ circular current loop of magnetic moment $M$ is in an arbitrary orientation in an external uniform magnetic field $\vec{B}$. The work done to rotate the loop by $30^{\circ}$ about an axis perpendicular to its plane is

An electron in the ground state of a hydrogen atom is revolving in an anticlockwise direction in a circular orbit of radius $r$. The atom is placed in a uniform magnetic field $B$ in such a way that the magnetic moment of the orbital electron makes an angle of $30^{\circ}$ with the magnetic field. The torque experienced by the orbital electron is

$A$ circular coil of radius $R$ and $N$ turns has negligible resistance. As shown in the schematic figure,its two ends are connected to two wires and it is hanging by those wires with its plane being vertical. The wires are connected to a capacitor with charge $Q$ through a switch. The coil is in a horizontal uniform magnetic field $B_0$ parallel to the plane of the coil. When the switch is closed,the capacitor gets discharged through the coil in a very short time. By the time the capacitor is discharged fully,the magnitude of the angular momentum gained by the coil will be (assume that the discharge time is so short that the coil has hardly rotated during this time):

$A$ square loop of side $2a$ carrying current $I$ is kept in the $XZ$ plane with its centre at the origin. $A$ long wire carrying the same current $I$ is placed parallel to the $z$-axis and passes through the point $(0, b, 0)$,where $b >> a$. The magnitude of the torque on the loop about the $z$-axis is given by:

$A$ uniform,constant magnetic field $\vec B$ is directed at an angle of $45^o$ to the $x-$ axis in the $xy-$ plane. $PQRS$ is a rigid square wire frame carrying a steady current $I_0,$ with its centre at the origin $O.$ At time $t = 0,$ the frame is at rest in the position shown in the figure,with its sides parallel to the $x$ and $y$ axis. Each side of the frame is of mass $M$ and length $L.$ Find the torque $\vec \tau$ acting on the frame.

$A$ thin wire of length $L$ made of an insulating material is bent to form a circular loop and a positive charge $q$ is given so that it is distributed uniformly around the circumference of the loop. The loop is then rotated with an angular speed $\omega$ about an axis passing through its centre. If a uniform magnetic field $B$ directed parallel to the plane of the loop is applied,then the magnitude of the magnetic torque on the loop is: