$A$,$B$ and $C$ are three identical conductors but made from different materials. They are kept in contact as shown. Their thermal conductivities are $K$,$2K$ and $K/2$. The free end of $A$ is at $100^{\circ} C$ and the free end of $C$ is at $0^{\circ} C$. During steady state,the temperature of the junction of $A$ and $B$ is nearly (in $^{\circ} C$)

Two identical metal wires of thermal conductivities $K_{1}$ and $K_{2}$ respectively are connected in series. The effective thermal conductivity of the combination is

Two rods $A$ and $B$ of different materials but same cross-section are joined as shown in the figure. The free end of $A$ is maintained at $100^{\circ}C$ and the free end of $B$ is maintained at $0^{\circ}C$. If $l_2 = 2l_1$,$K_1 = 2K_2$ and the rods are thermally insulated from the sides to prevent heat losses,then the temperature $\theta$ of the junction of the two rods is ........ $^{\circ}C$.

$A$ composite block is made of slabs $A, B, C, D$ and $E$ of different thermal conductivities (given in terms of a constant $K$) and sizes (given in terms of length,$L$) as shown in the figure. All slabs are of same width. Heat $Q$ flows only from left to right through the blocks. Then in steady state:
$(A)$ Heat flow through $A$ and $E$ slabs are same.
$(B)$ Heat flow through slab $E$ is maximum.
$(C)$ Temperature difference across slab $E$ is smallest.
$(D)$ Heat flow through $C =$ Heat flow through $B +$ Heat flow through $D$.

Two rods having the same cross-sectional area are used to connect two reservoirs at temperatures $100\,^{\circ}C$ and $0\,^{\circ}C$ as shown. The temperature of the junction is $70\,^{\circ}C$. If the rods are now interchanged,the temperature of the junction will be ......... $^{\circ}C$.

Four identical rods of the same material are joined end to end to form a square. If the temperature difference between the ends of a diagonal is $100^{\circ}C$,then the temperature difference between the ends of the other diagonal will be ........ $^{\circ}C$.