$A$ large open-top water tank is completely filled with water. $A$ small hole of diameter $4 \,mm$ is made $10 \,m$ below the water level. The flow rate of water through the hole is (Acceleration due to gravity $= 10 \,m/s^2$)

There is a hole in the bottom of a tank containing water. If the total pressure at the bottom is $3 \ atm$,then the velocity of water flowing from the hole is $(1 \ atm = 10^5 \ Pa)$ :-

Tanks $A$ and $B$ open at the top contain two different liquids up to a certain height. $A$ hole is made in the wall of each tank at a depth $h$ from the surface of the liquid. The area of the hole in $B$ is twice that of the hole in $A$. If the liquid mass flux through each hole is equal,then the ratio of the densities of the liquids,$\rho_A / \rho_B$,is:

$A$ tank is filled up to a height $h$ with a liquid and is placed on a platform of height $h$ from the ground. To get the maximum range $x_m$,a small hole is punched at a distance of $y$ from the free surface of the liquid. Then:

$A$ large storage tank, open to the atmosphere at the top and filled with water, develops a small hole in its side at a point $20.0 \ m$ below the water level. If the rate of flow from the hole is $3.08 \times 10^{-5} \ m^3 s^{-1}$, then the diameter of the hole is (Take $g = 10 \ m s^{-2}$): (in $mm$)

Consider the configuration of a stationary water tank of cross-sectional area $A_{0}$ and a small bucket as shown in the figure below. What is the speed $v$ (in $m/s$) of the bucket so that the water leaking out of a hole of cross-sectional area $A$ (as shown) from the water tank does not fall outside the bucket? (Take $h=5 \, m$,$H=5 \, m$,$g=10 \, m/s^{2}$,$A=5 \, cm^{2}$,and $A_{0}=500 \, cm^{2}$).