$A$ voltmeter of $250 mV$ range having a resistance of $10 \Omega$ is converted into an ammeter of $250 mA$ range. The value of the necessary shunt is (nearly): (in $\Omega$)

In a suspended-type moving coil galvanometer,a quartz suspension is used because:

$A$ moving coil galvanometer has a resistance of $50\,\Omega$ and gives full-scale deflection for $10\,mA$. How could it be converted into an ammeter with a full-scale deflection for $1\,A$?

$A$ $50\,\Omega$ resistance is connected to a battery of $5\,V$. $A$ galvanometer of resistance $100\,\Omega$ is to be used as an ammeter to measure current through the resistance. For this,a resistance $r_s$ is connected to the galvanometer. Which of the following connections should be employed if the measured current is within $1\%$ of the current without the ammeter in the circuit?

$A$ galvanometer may be converted into an ammeter or a voltmeter. In which of the following cases will the resistance of the device so obtained be the largest?

If only $\frac{1}{51}$ of the main current is to be passed through a galvanometer,then the shunt required is $R_1$. If only $\frac{1}{11}$ of the main voltage is to be developed across the galvanometer,then the resistance required is $R_2$. Find the ratio $\frac{R_2}{R_1}$.