$A$ metallic ring of radius $r$ and cross-sectional area $A$ is fitted into a wooden circular disc of radius $R$ $(R > r)$. If the Young's modulus of the material of the ring is $Y$, the force with which the metal ring expands is

$A$ piece of copper having a rectangular cross-section of $15.2 \; mm \times 19.1 \; mm$ is pulled in tension with $44,500 \; N$ force,producing only elastic deformation. Calculate the resulting strain.

One end of a steel wire of radius $r$ is fixed to a ceiling and a load of $3 \ kg$ is attached to the free end of the wire. Another wire made of copper of radius $2r$ is attached to the bottom of the $3 \ kg$ load and a $2 \ kg$ load is attached to the free end of the copper wire. The ratio of longitudinal strains produced in copper and steel wires is (Young modulus of steel $= 20 \times 10^{10} \ Nm^{-2}$,Young modulus of copper $= 12 \times 10^{10} \ Nm^{-2}$)

The Young's modulus of a wire of length $L$ and radius $r$ is $Y$. If the length is reduced to $\frac{L}{2}$ and radius is $\frac{r}{2}$,then the Young's modulus will be

The speed of a transverse wave travelling in a wire of length $50 \text{ cm}$,cross-sectional area $1 \text{ mm}^2$ and mass $5 \text{ g}$ is $80 \text{ ms}^{-1}$. The Young's modulus of the material of the wire is $4 \times 10^{11} \text{ Nm}^{-2}$. The extension in the length of the wire is

$A$ uniform steel rod of mass $1.8 \,kg$ and length $0.8 \,m$ is hung from a nail with the help of two steel wires,each of area of cross-section $0.01 \,mm^2$ and unstretched length $0.5 \,m$,as shown in the figure. The centre of mass of the rod lies vertically below the nail. The increase in the distance between the centre of mass of the rod and the nail due to stretching of the wires as the rod hangs is . . . . . . $mm$. (Young's modulus of steel $= 2 \times 10^{11} \,N/m^2$ and acceleration due to gravity $= 10 \,m/s^2$)