A thin uniform circular disc of mass frac{10} | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The moment of inertia $I$ of a circular disc about an axis passing through its centre and perpendicular to its plane is given by $I = \frac{1}{2}M

Vedclass · Accepted Answer

$70$

Vedclass · Answer

(B) The moment of inertia $I$ of a circular disc about an axis passing through its centre and perpendicular to its plane is given by $I = \frac{1}{2}MR^2$.Given $M = \frac{10}{\pi^2} \,kg$ and $R = 2 \,m$, we have $I = \frac{1}{2} 	imes \frac{10}{\pi^2} 	imes (2)^2 = \frac{20}{\pi^2} \,kg \cdot m^2$.The initial angular speed $\omega_1 = 90 \,rev/min = 90 	imes \frac{2\pi}{60} \,rad/s = 3\pi \,rad/s$.The final angular speed $\omega_2 = 120 \,rev/min = 120 	imes \frac{2\pi}{60} \,rad/s = 4\pi \,rad/s$.According to the work-energy theorem, the work done $W$ is equal to the change in rotational kinetic energy: $W = \Delta K = \frac{1}{2}I(\omega_2^2 - \omega_1^2)$.Substituting the values: $W = \frac{1}{2} 	imes \frac{20}{\pi^2} 	imes ((4\pi)^2 - (3\pi)^2) = \frac{10}{\pi^2} 	imes (16\pi^2 - 9\pi^2) = \frac{10}{\pi^2} 	imes 7\pi^2 = 70 \,J$.

$A$ thin uniform circular disc of mass $\frac{10}{\pi^2} \,kg$ and radius $2 \,m$ is rotating about an axis passing through its centre and perpendicular to its plane. The work done to increase the angular speed of the disc from $90 \,rev/min$ to $120 \,rev/min$ is (in $\,J$)

Similar Questions

$A$ light rod carries three equal masses $A$,$B$,and $C$ as shown in the figure. If the rod is released from the horizontal position,what will be the velocity of mass $B$ when the rod reaches the vertical position?

$A$ wheel is rotating with an angular speed of $20\ rad/s$. It is stopped to rest by applying a constant torque in $4\ s$. If the moment of inertia of the wheel about its axis is $0.20\ kg\cdot m^2$,then the work done by the torque in two seconds will be .......... $J$.

$A$ thin rod of mass $m$ and length $l$ is oscillating about a horizontal axis through its one end. Its maximum angular speed is $\omega$. Its centre of mass will rise up to a maximum height of:

The angular velocity of a body is $\vec{\omega} = 2\hat{i} + 3\hat{j} + 4\hat{k}$ and a torque $\vec{\tau} = \hat{i} + 2\hat{j} + 3\hat{k}$ acts on it. The rotational power will be .......... $W$.

$A$ wheel of moment of inertia $10 \ kg \cdot m^2$ is rotating at $10$ rotations per minute. The work done in increasing its speed to $5$ times its initial value will be .......... $J$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module