A rod of length l is held vertically stationa | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) When the rod is released, its potential energy is converted into rotational kinetic energy about the pivot point $P$.The initial potential energy

Vedclass · Accepted Answer

$\sqrt{3gl}$

Vedclass · Answer

(B) When the rod is released, its potential energy is converted into rotational kinetic energy about the pivot point $P$.The initial potential energy of the rod is $U = mg(\frac{l}{2})$, because the center of gravity is at a distance of $\frac{l}{2}$ from the pivot point $P$.The rotational kinetic energy of the rod is $K = \frac{1}{2}I\omega^2$, where $I$ is the moment of inertia of the rod about the end $P$, given by $I = \frac{ml^2}{3}$.By the law of conservation of energy, the initial potential energy equals the final rotational kinetic energy:$mg(\frac{l}{2}) = \frac{1}{2}I\omega^2$$mg(\frac{l}{2}) = \frac{1}{2}(\frac{ml^2}{3})\omega^2$$g = \frac{l}{3}\omega^2$$\omega^2 = \frac{3g}{l} \implies \omega = \sqrt{\frac{3g}{l}}$The linear velocity $v$ of the upper end of the rod is given by $v = \omega l$.Substituting the value of $\omega$:$v = \sqrt{\frac{3g}{l}} 	imes l = \sqrt{3gl}$

$A$ rod of length $l$ is held vertically stationary with its lower end located at a point $P$ on a horizontal plane. When the rod is released to topple about $P$, the velocity of the upper end of the rod with which it hits the ground is

Similar Questions

$A$ hollow cone of radius $R$ and height $H = 2R$ is placed on an inclined plane of inclination $\theta$. If $\theta$ is increased gradually,at what value of $\theta$ will the cone topple? Assume sufficient friction is present to prevent slipping.

The instantaneous velocity of point $B$ of a rod of length $0.5 \ m$ is $3 \ m/s$ at an angle of $30^{\circ}$ with the rod as shown. Find the angular velocity of the rod such that the velocity of end $A$ is minimum.

Two points $A$ and $B$ on a rigid body are moving as shown in the figure. The angular velocity of the body is:

Calculate the minimum amount of work necessary to overturn a crate of mass $100 \ kg$,first about edge $AB$,then about edge $A_1B_1$. The dimensions of the crate are given in the figure. (Assume $g = 10 \ m/s^2$) (in $J$)

There is a rod of length $l$. The velocities of its two ends are $v_1$ and $v_2$ in opposite directions normal to the rod. The distance of the instantaneous axis of rotation from $v_1$ is:

Vedclass Test Series

Exam Paper Generator

Online Exam Module