$A$ straight conductor $0.1 \ m$ long moves in a uniform magnetic field of $0.1 \ T$. The velocity of the conductor is $15 \ m/s$ and is directed perpendicular to the field. The emf induced between the two ends of the conductor is: (in $V$)

$A$ train with an axle of length $1.66 \ m$ is moving towards north with a speed of $90 \ km/h$. If the vertical component of the earth's magnetic field is $0.2 \times 10^{-4} \ T$,the emf induced across the ends of the axle of the train is: (in $mV$)

$A$ metal disc of radius $R$ rotates with an angular velocity $\omega$ about an axis perpendicular to its plane passing through its centre in a magnetic field of induction $B$ acting perpendicular to the plane of the disc. The induced e.m.f. between the rim and axis of the disc is:

$A$ rectangular conducting loop of sides $8\, cm$ and $2\, cm$ with a small cut is moving out of a region of uniform magnetic field of magnitude $0.3\, T$ directed normal to the loop as shown in figures $(i)$ and $(ii)$. If the velocity of the loop is $1\, cm\, s^{-1}$,then the ratio of the voltage developed across $ab$ in case $(i)$ to case $(ii)$ is:

$A$ jet plane is travelling towards west at a speed of $1800\; km/h$. What is the voltage difference developed between the ends of the wing having a span of $25\; m$,if the Earth's magnetic field at the location has a magnitude of $5 \times 10^{-4}\; T$ and the dip angle is $30^{\circ}$ (in $; V$)?

The figure shows an apparatus suggested by Faraday to generate electric current from a flowing river. Two identical conducting plates of length $a$ and width $b$ are placed parallel facing one another on opposite sides of the river flowing with velocity $u$ at a distance $d$ apart. Now both the plates are connected by a load resistance $R$. Then the current through the load $R$ is: (Consider the vertical component of the magnetic field produced by the earth is $B_v$ and the resistivity of river water is $\rho$.)