$A$ rectangular conducting loop of sides $8\, cm$ and $2\, cm$ with a small cut is moving out of a region of uniform magnetic field of magnitude $0.3\, T$ directed normal to the loop as shown in figures $(i)$ and $(ii)$. If the velocity of the loop is $1\, cm\, s^{-1}$,then the ratio of the voltage developed across $ab$ in case $(i)$ to case $(ii)$ is:

$A$ thin strip $10\, cm$ long is on a $U$ shaped wire of negligible resistance and it is connected to a spring of spring constant $0.5\, N/m$ (see figure). The assembly is kept in a uniform magnetic field of $0.1\, T$. If the strip is pulled from its equilibrium position and released, the number of oscillations it performs before its amplitude decreases by a factor of $e$ is $N$. If the mass of the strip is $50\, g$, its resistance $10\, \Omega$ and air drag is negligible, $N$ will be close to:

$A$ rectangular loop has a sliding connector $PQ$ of length $l$ and resistance $R \ \Omega$ and it is moving with a speed $v$ as shown. The set-up is placed in a uniform magnetic field going into the plane of the paper. The three currents $I_1, I_2$ and $I$ are:

$A$ metallic rod of length '$L$' is rotated with an angular speed of '$\omega$' normal to a uniform magnetic field '$B$' about an axis passing through one end of the rod,as shown in the figure. The induced emf will be:

$A$ conducting circular loop is placed in a uniform magnetic field,$B = 0.025 \, T$,with its plane perpendicular to the field. The radius of the loop is made to shrink at a constant rate of $1 \, mm \, s^{-1}$. The induced $emf$ when the radius is $2 \, cm$ is:

$A$ $800$ turn coil of effective area $0.05\; m^{2}$ is kept perpendicular to a magnetic field $5 \times 10^{-5}\; T$. When the plane of the coil is rotated by $90^{\circ}$ around any of its coplanar axes in $0.1\; s$,the $emf$ induced in the coil will be.....$V$