The power input in an X-ray tube is increased | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The power input $P$ to an $X$-ray tube is given by the product of the accelerating voltage $V$ and the beam current $I$ (which is determined by th

Vedclass · Accepted Answer

Increasing the filament current.

Vedclass · Answer

(C) The power input $P$ to an $X$-ray tube is given by the product of the accelerating voltage $V$ and the beam current $I$ (which is determined by the filament current),i.e.,$P = V 	imes I$.Increasing the filament current increases the temperature of the filament,which leads to a higher rate of thermionic emission of electrons from the cathode. This increase in the number of emitted electrons results in a higher beam current $I$.Since $P = V 	imes I$,an increase in the beam current $I$ directly leads to an increase in the power input $P$ to the $X$-ray tube.

The power input in an $X$-ray tube is increased by:

Similar Questions

$X$-rays are produced when ...

The intensity distribution of $X$-rays from two Coolidge tubes operated on different voltages $V_1$ and $V_2$ and using different target materials of atomic numbers $Z_1$ and $Z_2$ is shown in the figure. Which one of the following inequalities is true?

$(a)$ An $X$-ray tube produces a continuous spectrum of radiation with its short wavelength end at $0.45\,\mathring{A}$. What is the maximum energy of a photon in the radiation?
$(b)$ From your answer to $(a)$,guess what order of accelerating voltage (for electrons) is required in such a tube?

In an $X-ray$ tube, the voltage is $5 \, kV$ and the current is $3.2 \, mA$. The number of electrons striking the anode per second is:

$X$-rays are used for the structural analysis of crystals because:

Vedclass Test Series

Exam Paper Generator

Online Exam Module