Two wires of the same length and same material have radii $r_1$ and $r_2$. Their one end is fixed,and when an equal torque is applied to the other end,what is the ratio of their angular displacement?

The upper end of a wire of radius $4\, mm$ and length $100\, cm$ is clamped and its other end is twisted through an angle of $30^\circ$. The angle of shear is ..... $^\circ$.

The edge of an aluminium cube is $10\; cm$ long. One face of the cube is firmly fixed to a vertical wall. $A$ mass of $100\; kg$ is then attached to the opposite face of the cube. The shear modulus of aluminium is $25\; GPa$. What is the vertical deflection of this face?

$A$ square lead slab of side $50\, cm$ and thickness $10\, cm$ is subject to a shearing force (on its narrow face) of $9.0 \times 10^{4} \, N$. The lower edge is riveted to the floor. How much will the upper edge be displaced? (Given: Shear modulus of lead $G = 5.6 \times 10^{9} \, N/m^2$)

When a spiral spring is stretched by suspending a load from it,the strain produced is called . . . . . . strain.

Two slabs with square cross-sections of different materials $(1, 2)$ have equal sides $(l)$ and thicknesses $d_1$ and $d_2$ such that $d_2 = 2d_1$ and $l > d_2$. Considering the lower edges of these slabs are fixed to the floor,we apply equal shearing force on the narrow faces. The angle of deformation is $\theta_2 = 2\theta_1$. If the shear modulus of material $1$ is $4 \times 10^9 \ N/m^2$,then the shear modulus of material $2$ is $x \times 10^9 \ N/m^2$,where the value of $x$ is . . . . . . .