The loops have lengths $L$ or $2L$. All loops enter a magnetic field $\vec{B}$ with the same velocity $v$. Which of the following is correct?

$A$ $10 \, m$ wire kept in the east-west direction is falling with a velocity of $5 \, m/s$ perpendicular to the magnetic field of $0.3 \times 10^{-4} \, Wb/m^2$. The induced e.m.f. across the terminals of the wire will be:

$A$ wheel of $20$ metallic spokes, each $40 \text{ cm}$ long, is rotated with a speed of $180 \text{ rev/min}$ in a plane normal to the horizontal component of Earth's magnetic field $H_{e}$ at a place. If $H_{e} = 0.4 \text{ G}$ at that place, the induced emf between the axle and the rim of the wheel is:

An infinitely long straight wire carrying current $I$,an open rectangular loop,and a conductor $C$ with a sliding connector are located in the same plane,as shown in the figure. The connector has length $l$ and resistance $R$. It slides to the right with a velocity $v$. The resistance of the conductor and the self-inductance of the loop are negligible. The induced current in the loop,as a function of separation $r$ between the connector and the straight wire,is:

$A$ circular coil of area $3 \times 10^{-2} \, m^2$, $900$ turns, and a resistance of $1.8 \, \Omega$ is placed with its plane perpendicular to a uniform magnetic field of $3.5 \times 10^{-5} \, T$. The current induced in the coil when it is rotated through $180^{\circ}$ in half a second is (in $ \, mA$)

$A$ rod of length $20 \text{ cm}$ is rotating with an angular speed of $100 \text{ rps}$ in a magnetic field of strength $0.5 \text{ T}$ about one of its ends. What is the potential difference between the two ends of the rod? $(V)$