$A$ wheel having a moment of inertia of $5 \times 10^{-3} \ kg \ m^2$ is rotating at a rate of $20 \ rev/s$. The torque required to stop the wheel in $10 \ s$ is $... \times 10^{-2} \ N \ m$. (in $\pi$)

The thin rod shown below has mass $M$ and length $L$. $A$ force $F$ acts at one end as shown,and the rod is free to rotate about the other end in the plane of the force. The initial angular acceleration of the rod is ........

$A$ disc has mass $M$ and radius $R$. How much tangential force should be applied to the rim of the disc so as to rotate the disc with angular velocity $\omega$ in time $t$?

$A$ triangular plate of uniform thickness and density rotates about an axis perpendicular to the plane of the paper. In case $(a)$,the axis passes through point $A$,and in case $(b)$,it passes through point $B$. If an equal force $F$ is applied as shown in the figure,in which case will the angular acceleration be greater?

$A$ horizontal heavy uniform bar of weight $W$ is supported at its ends by two men. At the instant one of the men lets go of his end of the rod,the force on the other man's hand changes to:

$A$ uniform disc of mass $m$ and radius $R$ is pivoted at point $P$ and is free to rotate in a vertical plane. The centre $C$ of the disc is initially in a horizontal position with $P$ as shown in the figure. If it is released from this position,then its angular acceleration when the line $PC$ is inclined to the horizontal at an angle $\theta$ is ............