$A$ copper wire of length $4.0 \, m$ and area of cross-section $1.2 \, cm^2$ is stretched with a force of $4.8 \times 10^3 \, N$. If Young's modulus for copper is $1.2 \times 10^{11} \, N/m^2$,the increase in the length of the wire will be:

What force is required to stretch a wire of cross-sectional area $1 \, cm^2$ to $1.1$ times its original length? (Given: Young's modulus $Y = 2 \times 10^{11} \, N/m^2$)

$A$ steel rod of diameter $1\,cm$ is clamped firmly at each end when its temperature is $25\,^{\circ}C$ so that it cannot contract on cooling. The tension in the rod at $0\,^{\circ}C$ is approximately ......... $N$ $(\alpha = 10^{-5}/\,^{\circ}C, Y = 2 \times 10^{11}\,N/m^2)$

$A$ rod is fixed between two points at $20\,^oC$. The coefficient of linear expansion of the material of the rod is $1.1 \times 10^{-5}/\,^oC$ and Young's modulus is $1.2 \times 10^{11}\,N/m^2$. Find the stress developed in the rod if the temperature of the rod becomes $10\,^oC$.

Two wires are made of the same material and have the same volume. The first wire has cross-sectional area $A$ and the second wire has cross-sectional area $3A$. If the length of the first wire is increased by $\Delta l$ on applying a force $F$,how much force is needed to stretch the second wire by the same amount?

Two wires $A$ and $B$ made of different materials of length $6.0 \ cm$ and $5.4 \ cm$, respectively, and area of cross-sections $3.0 \times 10^{-5} \ m^2$ and $4.5 \times 10^{-5} \ m^2$, respectively, are stretched by the same magnitude under a given load. The ratio of the Young's modulus of $A$ to that of $B$ is $x : 3$. The value of $x$ is . . . . . . . . . . .