$A$ force $F$ is applied on a wire of radius $r$ and length $L$,and the change in the length of the wire is $l$. If the same force $F$ is applied on a wire of the same material with radius $2r$ and length $2L$,then what is the change in the length of the second wire?

Two wires are made of the same material and have the same volume. The first wire has cross-sectional area $A$ and the second wire has cross-sectional area $3A$. If the length of the first wire is increased by $\Delta l$ on applying a force $F$,how much force is needed to stretch the second wire by the same amount?

The area of cross-section of a steel wire $(Y = 2.0 \times 10^{11} \ N/m^2)$ is $0.1 \ cm^2$. The force required to double its length will be

An object of mass $15 \,kg$ is attached to the end of a metal wire of unstretched length $1.0 \,m$. The object is then whirled in a vertical circle with an angular velocity of $4 \,rad/s$ at the bottom of the circle. If the cross-sectional area of the wire is $0.05 \,cm^2$ and Young's modulus of the metal is $2 \times 10^{11} \,N/m^2$, then calculate the elongation of the wire when the mass is at the lowest point of its path. (Take $g = 10 \,m/s^2$) (in $\,mm$)

Two steel wires of same length $L$ but radii $r$ and $2r$ are connected together end to end and tied to a wall as shown. The force $F$ stretches the combination by $10 \ mm$. How far does the junction point $A$ move (in $mm$)?

$A$ horizontal steel railroad track has a length of $100 \, m$ when the temperature is $25^{\circ} C$. The track is constrained from expanding or bending. The stress on the track on a hot summer day,when the temperature is $40^{\circ} C$,is ............. $\times 10^7 \, Pa$. (Note: The linear coefficient of thermal expansion for steel is $1.1 \times 10^{-5} /^{\circ} C$ and the Young's modulus of steel is $2 \times 10^{11} \, Pa$.)