A hydraulic press containing water has two ar | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) According to Pascal's Law, the pressure applied to an enclosed fluid is transmitted undiminished to every portion of the fluid and the walls of th

Vedclass · Accepted Answer

$1000$

Vedclass · Answer

(B) According to Pascal's Law, the pressure applied to an enclosed fluid is transmitted undiminished to every portion of the fluid and the walls of the containing vessel.Therefore, the pressure at both arms must be equal for equilibrium:$\frac{F_1}{A_1} = \frac{F_2}{A_2}$Here, $F_1$ is the force on the thicker arm, $A_1$ is the area of the thicker arm, $F_2 = 10 \,N$ is the force on the thinner arm, and $A_2$ is the area of the thinner arm.The diameter of the thicker arm is $D_1 = 14 \,cm$, so its radius is $r_1 = 7 \,cm$.The diameter of the thinner arm is $D_2 = 1.4 \,cm$, so its radius is $r_2 = 0.7 \,cm$.Substituting the areas $A = \pi r^2$:$\frac{F_1}{\pi (7)^2} = \frac{10}{\pi (0.7)^2}$$F_1 = 10 	imes \frac{49}{0.49}$$F_1 = 10 	imes 100 = 1000 \,N$.

$A$ hydraulic press containing water has two arms with diameters as shown in the figure. $A$ force of $10 \,N$ is applied on the surface of water in the thinner arm. The force required to be applied on the surface of water in the thicker arm to maintain equilibrium of water is . . . . . . $N$.

Similar Questions

State Pascal's law.

$A$ hydraulic press can lift $100\, kg$ when a mass $'m'$ is placed on the smaller piston. It can lift ......... $kg$ when the diameter of the larger piston is increased by $4$ times and that of the smaller piston is decreased by $4$ times,keeping the same mass $'m'$ on the smaller piston.

$A$ hydraulic automobile lift is designed to lift vehicles of mass $5000\,kg$. The area of cross-section of the cylinder carrying the load is $250\,cm^2$. The maximum pressure the smaller piston would have to bear is [Assume $g = 10\,m/s^2$].

In a hydraulic lift,if the radius of the smaller piston is $5 \ cm$,and the radius of the larger piston is $50 \ cm$,then the weight that the larger piston can support when a force of $250 \ N$ is applied to the smaller piston is (in $kN$)

In a hydraulic lift,the surface area of the input piston is $6 \ cm^2$ and that of the output piston is $1500 \ cm^2$. If $100 \ N$ force is applied to the input piston to raise the output piston by $20 \ cm$,then the work done is . . . . . . $kJ$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module