$A$ rigid body rotates about a fixed axis with variable angular velocity equal to $(\alpha - \beta t)$ at time $t,$ where $\alpha$ and $\beta$ are constants. The angle through which it rotates before it comes to rest is

Four masses of $2 \ kg$ each are attached to an axle by spokes of length $1/4 \ m$ as shown in the figure. $A$ force $F = 24 \ N$ is applied at the end of a spoke of length $1/2 \ m$ at an angle of $30^{\circ}$ to produce an angular acceleration $\alpha$. The value of $\alpha$ is ........ $rad/s^2$.

$A$ flywheel is rotating at a rate of $150 \text{ rev/minute}$. If it slows at a constant retardation of $\pi \text{ rad/s}^2$, then the time required for the wheel to come to rest is (in $\text{ s}$)

$A$ pulley has the shape of a uniform solid disc of mass $2 \ kg$ and radius $0.5 \ m$. $A$ string is wrapped over its rim and is pulled by a force of $2.5 \ N$. The pulley is free to rotate about its axis. Initially,the pulley is at rest. Find the angular velocity of the pulley just after $10 \ s$. (in $rad/s$)

In the given figure,about which axis will the angular acceleration be greater if a force is applied at the midpoint of the triangular frame?

$A$ uniform disc of mass $m$ and radius $R$ is pivoted at point $P$ and is free to rotate in a vertical plane. The centre $C$ of the disc is initially in a horizontal position with $P$ as shown in the figure. If it is released from this position,then its angular acceleration when the line $PC$ is inclined to the horizontal at an angle $\theta$ is ............