$A$ rigid uniform bar $AB$ of length $L$ is slipping from its vertical position on a frictionless floor (as shown in the figure). At some instant of time,the angle made by the bar with the vertical is $\theta$. Which of the following statements about its motion is/are correct?
$[A]$ The midpoint of the bar will fall vertically downward
$[B]$ The trajectory of the point $A$ is a parabola
$[C]$ Instantaneous torque about the point in contact with the floor is proportional to $\sin \theta$
$[D]$ When the bar makes an angle $\theta$ with the vertical,the displacement of its midpoint from the initial position is proportional to $(1-\cos \theta)$

$A$ thin uniform straight rod of mass $2 \, kg$ and length $1 \, m$ is free to rotate about its upper end when at rest. It receives an impulsive blow of $10 \, Ns$ at its lowest point,normal to its length as shown in the figure. The kinetic energy of the rod just after impact is ........ $J$.

$A$ uniform thin cylindrical disk of mass $M$ and radius $R$ is attached to two identical massless springs of spring constant $k$ which are fixed to the wall as shown in the figure. The springs are attached to the axle of the disk symmetrically on either side at a distance $d$ from its centre. The axle is massless and both the springs and the axle are in a horizontal plane. The unstretched length of each spring is $L$. The disk is initially at its equilibrium position with its centre of mass $(CM)$ at a distance $L$ from the wall. The disk rolls without slipping with velocity $\vec{V}_0 = V_0 \hat{i}$. The coefficient of friction is $\mu$.
$1.$ The net external force acting on the disk when its centre of mass is at displacement $x$ with respect to its equilibrium position is
$(A) -kx$ $(B) -2kx$ $(C) -\frac{2kx}{3}$ $(D) -\frac{4kx}{3}$
$2.$ The centre of mass of the disk undergoes simple harmonic motion with angular frequency $\omega$ equal to
$(A) \sqrt{\frac{k}{M}}$ $(B) \sqrt{\frac{2k}{M}}$ $(C) \sqrt{\frac{2k}{3M}}$ $(D) \sqrt{\frac{4k}{3M}}$
$3.$ The maximum value of $V_0$ for which the disk will roll without slipping is
$(A) \mu g \sqrt{\frac{M}{k}}$ $(B) \mu g \sqrt{\frac{M}{2k}}$ $(C) \mu g \sqrt{\frac{3M}{k}}$ $(D) \mu g \sqrt{\frac{5M}{2k}}$

Two discs $A$ and $B$ are mounted coaxially on a vertical axle. The discs have moments of inertia $I$ and $2I$ respectively about the common axis. Disc $A$ is imparted an initial angular velocity $2\omega$ using the entire potential energy of a spring compressed by a distance $x_1$. Disc $B$ is imparted an angular velocity $\omega$ by a spring having the same spring constant and compressed by a distance $x_2$. Both the discs rotate in the clockwise direction.
$1.$ The ratio of $x_1/x_2$ is
$(A)$ $2$ $(B)$ $1/2$ $(C)$ $\sqrt{2}$ $(D)$ $1/\sqrt{2}$
$2.$ When disc $B$ is brought in contact with disc $A$,they acquire a common angular velocity in time $t$. The average frictional torque on one disc by the other during this period is
$(A)$ $\frac{2I\omega}{3t}$ $(B)$ $\frac{9I\omega}{2t}$ $(C)$ $\frac{9I\omega}{4t}$ $(D)$ $\frac{3I\omega}{2t}$
$3.$ The loss of kinetic energy during the above process is
$(A)$ $\frac{I\omega^2}{2}$ $(B)$ $\frac{I\omega^2}{3}$ $(C)$ $\frac{I\omega^2}{4}$ $(D)$ $\frac{I\omega^2}{6}$

$A$ cube of side $a$ is moving with velocity $v$ on a smooth horizontal surface. It hits a linear raised obstacle $O$ on the horizontal surface (as shown in the figure). The angular speed of the block after hitting $O$ will be

$A$ uniform metallic rod rotates about its perpendicular bisector with constant angular speed. If it is heated uniformly to raise its temperature slightly,what happens to its speed of rotation?