$A$ rod of length $L$ and uniform cross-sectional area has varying thermal conductivity which changes linearly from $2K$ at end $A$ to $K$ at the other end $B$. The ends $A$ and $B$ of the rod are maintained at constant temperatures $100^oC$ and $0^oC$, respectively. At steady state, the graph of temperature $T = T(x)$, where $x$ is the distance from end $A$, will be:

One end of a uniform metal rod of length $100 \, cm$ is placed in ice and the other end is placed in boiling water. A point of the rod which is at a distance of $60 \, cm$ from the ice end is maintained at a constant temperature of $325^{\circ} C$. If $2 \, g$ of water is converted into steam per second, the mass of ice melted per second in steady state is (Latent heat of steam $= 6.75$ times latent heat of fusion of ice). (in $g$)

Three rods of the same dimension have thermal conductivities $3K$,$2K$,and $K$. They are arranged as shown in the figure,with their ends at $100^oC$,$50^oC$,and $20^oC$. The temperature of their junction is ......... $^oC$.

Two bodies $A$ and $B$ have thermal emissivities of $0.01$ and $0.81$ respectively. The outer surface areas of the two bodies are the same. The two bodies emit total radiant power at the same rate. The wavelength ${\lambda _B}$ corresponding to maximum spectral radiancy in the radiation from $B$ is shifted from the wavelength corresponding to maximum spectral radiancy in the radiation from $A$ by $1.00\;\mu m$. If the temperature of $A$ is $5802\;K$,then:

Three rods of Copper,Brass,and Steel are welded together to form a $Y$ shaped structure. The area of cross-section of each rod is $4 \ cm^2$. The end of the copper rod is maintained at $100^\circ C$,whereas the ends of the brass and steel rods are kept at $0^\circ C$. The lengths of the copper,brass,and steel rods are $46 \ cm$,$13 \ cm$,and $12 \ cm$ respectively. The rods are thermally insulated from the surroundings except at the ends. The thermal conductivities of copper,brass,and steel are $0.92$,$0.26$,and $0.12 \ CGS$ units respectively. The rate of heat flow through the copper rod is ....... $cal \ s^{-1}$.

$A$ black body radiates maximum energy at wavelength $\lambda$ at temperature $T_1$ and its emissive power is $E$. When the temperature of the body is changed to $T_2$, it radiates maximum energy at wavelength $\frac{2\lambda}{3}$, then the emissive power will become