$A$ steel ring of radius $r$ and cross-section area $A$ is fitted onto a wooden disc of radius $R$ $(R > r)$. If Young's modulus is $E$,then the force with which the steel ring is expanded is

Two wires of the same length and radius are joined end-to-end and loaded. The Young's moduli of the materials of the two wires are $Y_{1}$ and $Y_{2}$. If the combination behaves as a single wire,then its equivalent Young's modulus is:

$A$ force is applied to a steel wire '$A$',rigidly clamped at one end. As a result,the elongation in the wire is $0.2\,mm$. If the same force is applied to another steel wire '$B$' of double the length and a diameter $2.4$ times that of the wire '$A$',the elongation in the wire '$B$' will be $............\times 10^{-2}\,mm$ (wires having uniform circular cross sections).

$5 \,m$ long aluminium wire $(Y = 7 \times 10^{10} \,N/m^2)$ of diameter $3 \,mm$ supports a $40 \,kg$ mass. In order to have the same elongation in a copper wire $(Y = 12 \times 10^{10} \,N/m^2)$ of the same length under the same weight, the diameter should be (in $mm$):

$A$ metallic rod $1 \, cm$ long with a square cross-section is heated through $1^{\circ} C$. If Young's modulus of elasticity of the metal is $E$ and the mean coefficient of linear expansion is $\alpha$ per degree Celsius,then the compressional force required to prevent the rod from expanding along its length is: (Neglect the change of cross-sectional area)

There is some change in length when a $33000 \,N$ tensile force is applied on a steel rod of area of cross-section $10^{-3} \,m^2$. The change of temperature required to produce the same elongation, if the steel rod is heated, is (The modulus of elasticity is $3 \times 10^{11} \,N/m^2$ and the coefficient of linear expansion of steel is $1.1 \times 10^{-5} /{ }^{\circ}C$). (in $^{\circ}C$)