$A$ structural steel rod has a radius of $10\,mm$ and length of $1.0\,m.$ $A$ $100\,kN$ force stretches it along its length. Young's modulus of structural steel is $2 \times 10^{11}\,N/m^2.$ The percentage strain is about ....... $\%$

The ratio of diameters of two wires of the same material is $n : 1$. The length of each wire is $4 \ m$. On applying the same load,the increase in length of the thin wire will be:

$A$ uniform dense rod with non-uniform Young's modulus is hanging from the ceiling under gravity. If the elastic energy density at every point is the same,then how will Young's modulus change with $x$ as shown in the graphs?

$A$ $500 \,g$ ball is attached to one end of an aluminum wire of area of cross-section $0.5 \,mm^2$ and an unstretched length of $1.4 \,m$. The other end of the wire is fixed to the top of a vertical pole. The ball rotates about the pole in a horizontal plane such that the angle between the wire and the horizontal is $30^{\circ}$. The increase in the length of the wire is . . . . . . $mm$. (Young's modulus of aluminum $= 0.7 \times 10^{11} \,N/m^2$ and acceleration due to gravity $= 10 \,m/s^2$)

If the ratio of lengths,radii,and Young's moduli of steel and brass wires in the figure are $a, b,$ and $c$ respectively,then the corresponding ratio of increase in their lengths is

Consider the situation shown in the figure. The force $F$ is equal to $m_2g/2$. If the area of cross-section of the string is $A$ and its Young's modulus is $Y$,find the strain developed in it. The string is light and there is no friction anywhere.