$A$ thermocouple uses Bismuth and Tellurium as the dissimilar metals. The sensitivity of Bismuth is $-72\,\mu V/{^oC}$ and that of Tellurium is $500\,\mu V/{^oC}$. If the difference between hot and cold junction is $100\,{^oC}$, then the maximum output will be ............... $mV$.

If for a thermocouple ${T_n}$ is the neutral temperature,${T_c}$ is the temperature of the cold junction,and ${T_i}$ is the temperature of inversion,then:

Two resistors with resistances $R_1$ and $R_2$ are connected in series and two capacitors with capacitances $C_1$ and $C_2$ are also connected in series. These two systems are connected to a battery of $EMF$ $\varepsilon$ as shown in the figure. The potential difference between points $a$ and $b$ is zero in the steady state if:

$A$ torch bulb rated as $4.5\, W$,$1.5\, V$ is connected as shown in the figure. The $e.m.f.$ of the cell needed to make the bulb glow at full intensity is ................ $V$.

The thermo emf of a thermocouple is given by $E = aT + bT^2$,where $\frac{a}{b} = -200^{\circ}C$. If the cold junction is kept at $30^{\circ}C$,then the inversion temperature is ($\varepsilon$ in volt,$T$ in centigrade). (in $K$)

The thermo-emf of a hypothetical thermocouple varies with the temperature $\theta$ of the hot junction as $E = a\theta + b\theta^2$ in volts,where the ratio $a/b$ is $700^{\circ}C$. If the cold junction is kept at $0^{\circ}C$,then the neutral temperature is: