$A$ uniform circular disc of mass $1.5 \ kg$ and radius $0.5 \ m$ is initially at rest on a horizontal frictionless surface. Three forces of equal magnitude $F=0.5 \ N$ are applied simultaneously along the three sides of an equilateral triangle $XYZ$ with its vertices on the perimeter of the disc (see figure). One second after applying the forces,the angular speed of the disc in $\text{rad } s^{-1}$ is:

$A$ solid cube of wood of side $2a$ and mass $M$ is resting on a horizontal surface as shown below. The cube is free to rotate about the fixed axis $AB$. $A$ bullet of mass $m (< M)$ and speed $v$ is shot horizontally at the face opposite to $ABCD$ at a height $h$ above the surface to impart the cube an angular speed $\omega_{c}$,so that the cube just topples over. Then,$\omega_{c}$ is (Note: the moment of inertia of the cube about an axis passing through the centre of mass and parallel to the edge is $2Ma^{2}/3$)

$A$ metal rod of length $L$ and mass $m$ is pivoted at one end. $A$ thin disk of mass $M$ and radius $R$ $(R < L)$ is attached at its center to the free end of the rod. Consider two ways the disc is attached: (case $A$) The disc is not free to rotate about its center and (case $B$) the disc is free to rotate about its center. The rod-disc system performs $SHM$ in a vertical plane after being released from the same displaced position. Which of the following statement$(s)$ is (are) true?

Three particles,each of mass $m$,are placed at the corners of an equilateral triangle of side $l$. Which of the following is/are correct?

$A$ body of mass $1 \,kg$ is suspended by a weightless string which passes over a pulley of mass $2 \,kg$ as shown in the figure. The mass is released from a height of $1.6 \,m$ from the ground. With what velocity does it strike the ground?

$A$ thin uniform straight rod of mass $2 \, kg$ and length $1 \, m$ is free to rotate about its upper end when at rest. It receives an impulsive blow of $10 \, Ns$ at its lowest point,normal to its length as shown in the figure. The kinetic energy of the rod just after impact is ........ $J$.