Three particles,each of mass $m$,are placed at the corners of an equilateral triangle of side $l$. Which of the following is/are correct?

The position vectors of two $1 \ kg$ particles,$(A)$ and $(B),$ are given by $\overrightarrow{r}_{A} = (\alpha_1 t^2 \hat{i} + \alpha_2 t \hat{j} + \alpha_3 \hat{k}) \ m$ and $\vec{r}_B = (\beta_1 t \hat{i} + \beta_2 t^2 \hat{j} + \beta_3 t \hat{k}) \ m$,respectively. Given $\alpha_1 = 1 \ m/s^2, \alpha_2 = 3n \ m/s, \alpha_3 = 2 \ m, \beta_1 = 2 \ m/s, \beta_2 = -1 \ m/s^2, \beta_3 = 4p \ m/s$,where $t$ is time,$n$ and $p$ are constants. At $t = 1 \ s$,$|\overrightarrow{V}_{A}| = |\overrightarrow{V}_{B}|$ and the velocities $\overrightarrow{V}_{A}$ and $\overrightarrow{V}_{B}$ are orthogonal. At $t = 1 \ s$,the magnitude of angular momentum of particle $(A)$ with respect to particle $(B)$ is $\sqrt{L} \ kg \ m^2/s$. The value of $L$ is:

$A$ ladder is leaned against a smooth wall and it is allowed to slip on a frictionless floor. Which figure represents the track of its centre of mass?

An annular disk of mass $M$,inner radius $a$ and outer radius $b$ is placed on a horizontal surface with coefficient of friction $\mu$,as shown in the figure. At some time,an impulse $J_0 \hat{x}$ is applied at a height $h$ above the center of the disk. If $h=h_m$ then the disk rolls without slipping along the $x$-axis. Which of the following statement$(s)$ is(are) correct?
$(A)$ For $\mu \neq 0$ and $a \rightarrow 0, h_m=b / 2$
$(B)$ For $\mu \neq 0$ and $a \rightarrow b, h_m=b$
$(C)$ For $h=h_m$,the initial angular velocity does not depend on the inner radius $a$.
$(D)$ For $\mu=0$ and $h=0$,the wheel always slides without rolling.

$A$ rod of length $1\,m$ is standing vertically. When its upper end is released and it falls such that the lower end touches the ground without slipping,the speed of the upper end when it hits the ground is:

Two cylindrical hollow drums of radii $R$ and $2R$ and of a common height $h$ are rotating with angular velocities $\omega$ (anti-clockwise) and $\omega$ (clockwise) respectively. Their axes,which are fixed,are parallel and in a horizontal plane separated by $3R$. They are now brought into contact.
$(a)$ Show the frictional forces just after contact.
$(b)$ Identify forces and torques external to the system just after contact.
$(c)$ What would be the ratio of final angular velocities when friction ceases?