A uniform metal rod is used as a bar pendulum | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) The time period of a physical pendulum is given by $T = 2\pi \sqrt{\frac{I}{mgd}}$. For a uniform rod of length $L$,$T \propto \sqrt{L}$.Taking th

Vedclass · Accepted Answer

$1 	imes 10^{-3} \%$

Vedclass · Answer

(D) The time period of a physical pendulum is given by $T = 2\pi \sqrt{\frac{I}{mgd}}$. For a uniform rod of length $L$,$T \propto \sqrt{L}$.Taking the derivative,the fractional change in the time period is given by $\frac{\Delta T}{T} = \frac{1}{2} \frac{\Delta L}{L}$.Since $\Delta L = L \alpha \Delta 	heta$,we have $\frac{\Delta L}{L} = \alpha \Delta 	heta$.Therefore,$\frac{\Delta T}{T} = \frac{1}{2} \alpha \Delta 	heta$.Given $\alpha = 2 	imes 10^{-6} /^{\circ}C$ and $\Delta 	heta = 10^{\circ}C$:$\frac{\Delta T}{T} = \frac{1}{2} 	imes (2 	imes 10^{-6}) 	imes 10 = 10^{-5}$.The percentage increase is $\frac{\Delta T}{T} 	imes 100 = 10^{-5} 	imes 100 = 10^{-3} \%$.

$A$ uniform metal rod is used as a bar pendulum. If the room temperature rises by $10^{\circ}C$,and the coefficient of linear expansion of the metal of the rod is $2 \times 10^{-6} /^{\circ}C$,the period of the pendulum will have a percentage increase of:

Similar Questions

Two metal plates $P$ and $Q$ of the same material are arranged as shown in the figure. If both the plates are uniformly heated through the same range of temperature,then

If two rods of lengths $L$ and $2L$,having coefficients of linear expansion $\alpha$ and $2\alpha$ respectively are connected end-to-end,then find the average coefficient of linear expansion of the composite rod.

What is thermal expansion? Write only its types.

Find the ratio of the length of a steel rod and a copper rod if the steel rod is $4 \ cm$ longer than the copper rod at any temperature. $[$The coefficients of linear expansion for steel and copper are $1.1 \times 10^{-5} /^{\circ} C$ and $1.7 \times 10^{-5} /^{\circ} C$ respectively$]$

$A$ hole of diameter $5 \ cm$ is drilled in a metal sheet at $30^{\circ} C$. The coefficient of linear expansion of the metal is $2 \times 10^{-5} K^{-1}$. The diameter of the hole when the temperature is raised to $230^{\circ} C$ is equal to: (in $cm$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module