$A$ uniform metallic wire is elongated by $0.04\, m$ when subjected to a linear force $F$. The elongation,if its length and diameter are doubled and subjected to the same force,will be ..... $cm$.

The speed of a transverse wave passing through a string of length $50 \; cm$ and mass $10 \; g$ is $60 \; ms^{-1}$. The area of cross-section of the wire is $2.0 \; mm^2$ and its Young's modulus is $1.2 \times 10^{11} \; Nm^{-2}$. The extension of the wire over its natural length due to its tension will be $x \times 10^{-5} \; m$. The value of $x$ is $...$

$A$ weight of $200 \, kg$ is suspended by a vertical wire of length $600.5 \, cm$. The area of cross-section of the wire is $1 \, mm^2$. When the load is removed,the wire contracts by $0.5 \, cm$. The Young's modulus of the material of the wire will be:

$A$ meter scale of mass $m$,Young's modulus $Y$,and cross-sectional area $A$ is hung vertically from the ceiling at the zero mark. The separation between the $30\ cm$ and $70\ cm$ marks will be: (Assume $\frac{mg}{AY}$ is dimensionless)

The mass and length of a wire are $M$ and $L$ respectively. The density of the material of the wire is $d$. On applying a force $F$ on the wire,the increase in length is $l$. Then,the Young's modulus of the material of the wire will be:

$A$ thick metal wire of density $\rho$ and length $L$ is hung from a rigid support. The increase in length of the wire due to its own weight is ($Y =$ Young's modulus of the material of the wire).